Roof coating is quite useful at retaining the value of your roof and making the roof have a longer life. Some of the reasons that are associated with the use of the product include enhancing the durability of structures as well as durability to weather conditions, energy conservation and finally the aspect of reducing costs. Below you will find information on what roof coatings are, what they can do for you, different types of coatings, and how to apply for a roof coating.
Benefits of Roof Coating
Weather Protection:
Roof coatings offer a barrier that protects a roof from any adverse weather factors such as rain, snow, and UV radiation hence will not leak or get damaged easily.
Energy Savings:
More and more mirrors are used in buildings to reduce the heat that gets absorbed through the walls, especially during summer when it gets very expensive to cool a building.
Extended Roof Life:
A layer of protection therefore by means of application of roof coatings can save roof durability, which is likely to lead to costly damages.
Cost-Effectiveness:
Many building administrators, who just purchase energy to their buildings, have realized that investing in roof covering and roof restoration can assist in reducing the energy charges in addition to delaying the expense of reroofing and principal roof restoration.
Enhanced Appearance:
The application of a new coat of
roofing material can enhance the appearance of the roof by increasing its esthetic appeal as it has a clean coat which makes the roof to look neat and has a consistent finish.
Types of Roof Coatings
Acrylic Coatings:
Advantages:
● Durable to UV and possesses high reflective nature.
● These sulphate based inks are environmentally friendly mainly because of their water solubility.
● It is quite convenient to apply and it is produced in various colors.
Drawbacks:
● However worn out in few months, shortly within the vulnerable weather regions it needs to be reapplied.
Silicone Coatings:
Advantages:
● Superior waterproofing
● High value of ponding water and excellent weathering.
● Durable and long-lasting
Drawbacks:
● Higher cost
● Professional application is suggested to get the best outcome of the products.
Polyurethane Coatings:
Advantages:
● High endurance coupled with resistance to impact and traffic.
● Perfect for buildings with many loads on the roof
● There are two types of amine wax; one that is aromatic and has low UV stability and the other, aliphatic and has high UV stability.
Drawbacks:
● Less cost effective and have a tendency of releasing bad smells during its application.
Elastomeric Coatings:
Advantages:
● Great mobility where it is adaptable to roof movement and does not crack.
● Perfect just for fixing any small spill and crack on an object.
● Reflective and UV resistant
Drawbacks:
● Demands good preparatory work on the surface, and sometimes requires an additional layer of the particular type.
Application Process
Preparation:
Perform initial roof cleaning in a bid to wash out any debris, loosed material, and grime. It may require use of water hose for pressure washing or washing with an appropriate chemical solution.
Repair:
Repair any pre-existing issues like cracks or leaks on the wall so that the epoxy will stick well to it.
Coating Selection:
Select a roof coating that correspond to the type of roof and its needs, factors such as climate and material being used.
Application:
Spread the coating following the information provided by the manufacturer regarding the thickness of the coat and the number of coats being applied, by brush, roller or sprayer as the case may be.
Curing:
After application of the coating, keep it to dry or cure as recommended by the manufacturers instructions inclusive of the type of coating used and the prevailing environmental conditions.
Maintenance:
It is advised to check the roof and the coating from time to time, and if the coating has peeled off or chipped, then it should be reapplied.\
Roof coating is one of the best solutions to preserve and extend the life expectancy of the propertys topmost barrier. Having a glimpse on the diverse benefits, types and ways of applying them, one gets into a position to select the most appropriate coating for the intended course of protecting the property from the impact of weather, increasing the energy efficiency as well as cutting expenses. It is advised that the solution be reapplied often so, your roof can remain in best shape for many years to come.