The name weeping tile may sound like a very super-construction material. A weeping tile is a draining system that keeps water away from your basement. In simpler terms, weeping tile is found on the area surrounding your foundation wall and is just a porous drainage pipe. The weeping tile is important material when considering drain repair.

The weeping tile is usually not visible from the home’s exterior since it is placed in a trench around the foundation wall and buried with soil similar to the rest of the landscape. The trench should be dug on a slope during the drain repair process to easily collect the underground water. Below is further discussion on weeping tile for the repair of drain Toronto to help with leakage issues.

1. Definition Of A Weeping Tile
The modern weeping tile can be defined as a porous plastic pipe on one side for drainage reasons. A weeping tile can also be referred to as a perimeter drain since it is installed on the perimeter of the foundation wall.

A weeping tile is one of the basic requirements when it comes to the process of drain repair Toronto. It is usually buried in a trench around the foundation walls with similar soil to the existing landscape, making it not easily visible from the outside unless some digging is done.

2. How A Weeping Tile Works
As mentioned earlier, the weeping tile is usually placed in a trench around the foundation wall but from the outside. The holes of the pipe that are only on one side are placed facing down. The weeping tile works by collecting the underground water when it rains, or there is snowmelt and directs it far away from the property.

The water collected and drained by the weeping tile can be directed to a specific place of choice, such as the garden or the sewer system.

The point behind the effectiveness of a weeping tile is placing it towards the direction of the slope where there is one. This makes it easier to direct the drained water away from the house. You can also create a slope away from the house if your home is constructed in a flat landscape.

3. Interior And Exterior Drains
During the drain repair process, you will realize that there may be a need for either interior or exterior drains depending on the current waterproofing issue. The water drained by the weeping tile has to go somewhere at the end of the day.

a. Inferior Drains
In this scenario, the weeping tile is connected to some pipe inside the home. The connected pipe directs water to the perimeter wall, eventually directing it into the sump pit or any other alternative.

On the occasion that the water rises beyond the holding capacity, the sump pump automatically turns on, which takes over pumping the drained water to the desired destination, either the garden or the sewer.

b. Exterior Drains
It is way simpler for the exterior drains because they directly collect the underground water and drains it to the desired destination.

The final destination of the drained water is normally the property owners’ choice based on whether they need to use the drained water or consider it waste. The exterior drains can be referred to as the French drain specifically.

4. Installation Of A Weeping Tile
In most modern homes, the initial construction of the structure includes the installation of the weeping tile. The trench where the pipe goes is usually excavated as part of the construction.

The professionals should be aware of the sloping requirements; if there is no slope in the surrounding area, they need to consider grading one.

During drain repair Toronto, you can have the pipe wrapped in a mesh as a protective measure to keep soil away from the holes which cause clogging. You can have the area around the weeping tile covered with coarse gravel for better drainage.

The property homeowners should be responsible to maintain the proper sloping around their property. This is important to ensure that water is always drained away from the property and not the opposite.